鲁鲁鲁鲁鲁视频在线观看_久艾草在线精品视频在线观看_久久天天躁日日躁狠狠综合_在线午夜精品自拍小视频

序號

標準號

標準名稱

基礎標準（28項）

1

ISO 836:2001

Terminology for refractories耐火材料術語

2

ISO 1146:1988

Pyrometric reference cones for laboratory use-Specification 實驗室用標準測溫錐-技術條件

3

ISO 1927-1:2012

Monolithic（Unshaped） refractory products- Part 1: Introduction and classification

不定形耐火材料-第1部分：介紹及分類

4

ISO 1927-2:2012

Monolithic（Unshaped） refractory products- Part 2: Sampling for testing

不定形耐火材料-第2部分：抽樣驗收

5

ISO 1927-3:2012

Monolithic（Unshaped） refractory products- Part 3: Characterization as received

不定形耐火材料-第3部分：接收試樣的特征

6

ISO 1927-4:2012

Monolithic（Unshaped） refractory products- Part 4: Determination of consistency of castables

不定形耐火材料-第4部分：澆注料稠度的測定

7

ISO 1927-5:2012

Monolithic（Unshaped） refractory products- Part 5: Preparation and treatment of test pieces

不定形耐火材料-第5部分：試樣制備和預處理

8

ISO 1927-6:2012

Monolithic（Unshaped） refractory products- Part 6: Measurement of physical properties

不定形耐火材料-第6部分：物理性能的測試

9

ISO 1927-7:2012

Monolithic（Unshaped） refractory products- Part 7: Tests on pre-formed shapes

不定形耐火材料-第7部分：預制件的測試

10

ISO 1927-8:2012

Monolithic（Unshaped） refractory products- Part 8: Determination of complementary properties  不定形耐火材料-第8部分：其他性能的測試

11

ISO 2245:2006

Shaped insulating refractory products-classification

定形隔熱耐火制品-分類

12

ISO 5019-1:1984

Refractory bricks-Dimensions-Part 1: Rectangular bricks

耐火磚-尺寸 第一部分：直形磚

13

ISO 5019-2:1984

Refractory bricks-Dimensions-Part 2: Arch bricks耐火磚-尺寸 第二部分：楔形磚

14

ISO 5019-3:1984

Refractory bricks-Dimensions-Part 3: Rectangular checker bricks for regenerative furnace

耐火磚-尺寸 第三部分：蓄熱室用直形格子磚

15

ISO 5019-4:1988

Refractory bricks-Dimensions-Part 4: Dome bricks for electric arc furnace roofs

耐火磚-尺寸 第四部分：電弧爐爐頂用球頂磚

16

ISO 5019-5:1984

Refractory bricks-Dimensions-Part 5: Skewbacks耐火磚-尺寸 第五部分：拱腳磚

17

ISO 5019-6:2005

Refractory bricks-Dimensions-Part 6: Basic bricks for oxygen steel-making converters耐火磚-尺寸 第六部分：氧化煉鋼轉爐用堿性磚

18

ISO 5022:1979

Shaped refractory products-Sampling and acceptance testing定形耐火制品-抽樣及驗收檢驗

19

ISO 5417:1986

Refractory bricks for use in rotary kilns-Dimensions回轉窯用磚-尺寸

20

ISO 8656-1:1988

Refractory products-Sampling of raw materials and unshaped products-Part 1: Sampling scheme耐火制品-耐火原料和不定形耐火材料抽樣第一部分：抽樣方案

21

ISO 9205:1988

Refractory bricks for use in rotary kilns- hot- face identification marking

回轉窯用耐火磚-熱面標記

22

ISO 10080:1990

Refractory products-Classification of dense ,shaped acid-resisting products

耐火制品-致密定形耐酸制品的分類

23

ISO 10081-1:2003

Classification of dense ,shaped refractory products-Part 1:Alumina-silica

致密定形耐火制品的分類 第一部分：鋁硅質耐火制品

24

ISO 10081-2:2003

Classification of dense ,shaped refractory products-Part 2: Basic products containing less than 7% residual carbon致密定形耐火制品的分類 第二部分：殘?zhí)苛啃∮?%的堿性耐火制品

25

ISO 10081-3:2003

Classification of dense ,shaped refractory products-Part 3: Basic products containing from  7% to 50% residual carbon致密定形耐火制品的分類 第三部分：殘?zhí)苛?%-50%的堿性耐火制品

26

ISO 10081-4:2014

Classification of dense ,shaped refractory products-Part 4: Special products致密定形耐火制品的分類 第四部分：特殊制品

27

ISO 12678-1:1996

Refractory products-Measurement of dimension and external defects of refractory bricks-part 1: Dimension and conformity to drawings耐火制品-耐火磚尺寸和外觀缺陷的檢驗 第一部分：實際尺寸與設計圖紙尺寸的一致性

28

ISO 12678-2:1996

Refractory products-Measurement of dimension and external defects of refractory bricks-part 2: Corner and edge defects and other surface imperfections

耐火制品-耐火磚尺寸和外觀缺陷的檢驗 第二部分：邊角缺陷及其他表面缺陷

物理實驗方法標準（38項）

29

ISO 528:1983

Refractory products-Determination of refractoriness 耐火制品-耐火度的測定

30

ISO 1893:2007

Refractory products-Determination of refractoriness under load-differential method with rising temperature

耐火制品-荷重軟化溫度的測定(示差-升溫法)

31

ISO 2477:2005

Shaped insulating refractory products-determination of permanent change in dimensions on heating

定形隔熱耐火制品-加熱永久線變化的測試

32

ISO 2478:1987

Dense shaped refractory products-determination of permanent change in dimensions on heating

致密定形耐火制品-加熱永久線變化的測試

33

ISO 3187:1989

Refractory products-Determination of creep in compression 耐火制品-壓蠕變的測定

34

ISO 5013:1985

Refractory products-Determination of modulus of rupture at elevated temperature

耐火制品-高溫抗折強度的測定

35

ISO 5014:1997

Dense and insulating shaped refractory products-Determination of modulus of rupture  at ambient temperature

致密和隔熱耐火制品-常溫抗折強度的測定

36

ISO 5016:1997

Shaped insulating refractory products-Determination of bulk density and true porosity定形隔熱耐火制品-體積密度和真氣孔率的測試

37

ISO 5017:2013

Dense shaped refractory products-Determination of bulk density ,apparent porosity and true porosity致密定形耐火制品-體積密度、顯氣孔率和真氣孔率的測試

38

ISO 5018:1983

Refractory materials-determination of true density耐火材料-真密度的測定

39

ISO 8840:2021

Refractory materials-determination of bulk density of granular materials

耐火材料-顆粒材料體積密度的測定

40

ISO 8841:1991

Dense shaped refractory products-Determination of permeability to gases

致密定形耐火制品-透氣度的測定

41

ISO 8890:1988

Dense shaped refractory products-Determination of resistance to sulfuric acid

致密定形耐火制品-抗硫酸侵蝕性的測定

42

ISO 8894-1：2010

Refractory materials-Determination of thermal conductivity-Part 1：Hot-wire methods（cross-array and resistance thermometer）

耐火材料-導熱系數的測定 第1部分：十字熱線法和電阻溫度計法

43

ISO 8894-2:2007

Refractory materials-Determination of thermal conductivity-Part 2：Hot-wire method（parallel）

耐火材料-導熱系數的測定 第二部分：平行線法

44

ISO 8895:2004

Shaped insulating refractory products-Determination of cold crushing strength

定形隔熱耐火制品-常溫耐壓強度的測定

45

ISO 10059-1:1992

Dense shaped refractory products-Determination of cold compressive strength Part 1: Referee test without packing

致密定形耐火制品-常溫耐壓強度的測定 第一部分：無襯墊仲裁法

46

ISO 10059-2:2003

Dense shaped refractory products-Determination of cold compressive strength Part 2: Test with packing

致密定形耐火制品-常溫耐壓強度的測定 第二部分：襯墊法

47

ISO 10060:1993

Dense shaped refractory products-test methods for products containing carbon

致密定形耐火制品-含碳制品試驗方法

48

ISO 10635:1999

Refractory products-methods of test for ceramic fiber products

耐火制品-陶瓷纖維制品試驗方法

49

ISO 12676:2000

Refractory products-Determination of resistance to carbon monoxide

耐火制品-抗一氧化碳性能的確定

50

ISO 12680-1:2005

Methods of test for refractory products-Part 1：Determination of dynamic Young^,s modulus by impulse excitation of vibration耐火材料試驗方法-第一部分：脈沖激發振動法測定楊氏模量

51

ISO 13765-1:2004

Refractory mortars-Part 1: Determination of consistency using the penetrating cone method耐火泥漿 第一部分：針入度法測定稠度

52

ISO 13765-2:2004

Refractory mortars-Part 2: Determination of consistency using the reciprocating flow table method耐火泥漿 第二部分：流動法測定稠度

53

ISO 13765-3:2004

Refractory mortars-Part 3: Determination of joint stability耐火泥漿 第三部分：粘結穩定性（粘結時間）的測定

54

ISO 13765-4:2004

Refractory mortars-Part 4: Determination of flexural bonding strength

耐火泥漿 第四部分：抗折粘結強度的測定

55

ISO 13765-5:2004

Refractory mortars-Part 5: Determination of grain size distribution(sieve analysis)耐火泥漿 第五部分：粒度分布（篩分析）的測定

56

ISO 13765-6:2004

Refractory mortars-Part 6: Determination of moisture content of ready-mixed mortars耐火泥漿 第六部分：濕態成品泥漿含水量的測定

57

ISO 13765-7:2021

Refractory mortars - Part 7: Determination of permanent change in dimensions on heating 耐火泥漿 第七部分：加熱永久線變化率試驗方法

58

ISO 16282:2007

Dense shaped refractory products-Determination of resistance to abrasion at ambient temperature

致密定形耐火制品 常溫耐磨試驗方法

59

ISO 16334:2013

Monolithic refractory products -- Determination of resistance to explosive spalling 不定形耐火制品 抗爆裂性試驗方法

60

ISO 16349:2015

Refractory materials -- Determination of abrasion resistance at elevated temperature  耐火材料 高溫耐磨性試驗方法

61

ISO 16835:2014

Refractory products -- Determination of thermal expansion 耐火制品 熱膨脹性試驗方法

62

ISO 18886:2016

Refractory test-piece preparation - Gunning refractory panels by wet gunning techniques 耐火材料試樣的制備-采用氣動-濕法噴補方法制備耐火噴射料大樣

63

ISO 20182:2008

Refractory test-piece preparation-Gunning

refractory panels by the pneumatic-nozzle mixing type guns 耐火材料試樣的制備-采用氣動-噴嘴混合型噴射方法制備耐火噴射料大樣

64

ISO 21736:2020

Refractories - Test methods for thermal shock resistance 耐火材料 抗熱震性試驗方法

65

ISO 22605:2020

Refractories - Determination of dynamic Young's modulus (MOE) at elevated temperatures by impulse excitation of vibration 耐火材料 高溫楊氏模量試驗方法（脈沖激振法）

66

ISO 22685:2021

Refractory products - Determination of compressive strength at elevated temperature 耐火材料 高溫耐壓強度試驗方法

化學分析方法標準（25項）

67

ISO 10058-1:2008

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica菱鎂礦和白云石耐火制品化學分析方法（可與X射線熒光法并行使用的另一種方法）-第一部分：儀器、試劑、溶樣及重量法測定二氧化硅

68

ISO 10058-2:2008

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis菱鎂礦和白云石耐火制品化學分析方法（可與X射線熒光法并行使用的另一種方法）-第二部分：濕法化學分析

69

ISO 10058-3:2008

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively

coupled plasma atomic emission spectrometry菱鎂礦和白云石耐火制品化學分析方法（可與X射線熒光法并行使用的另一種方法）-第三部分：火焰原子吸收分光光度法（FAAS）和感應耦合等離子原子發射光譜法(ICP-AES)

70

ISO 12677:2011

Chemical analysis of refractory products by XRF-Fused cast bead method

耐火制品X-射線熒光化學分析（玻璃樣片法）

71

ISO 14719:2011

Chemical analysis of refractory material glass and glazes - Determination of Fe²⁺ and Fe³⁺⁺ by the spectral photometric method with 1,10-phenanthroline

耐材、玻璃和釉料化學分析方法-二氮雜菲分光光度法測定二價和三價鐵離子

72

ISO 14720-1:2013

Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials -Part 1:Infrared measurement methods

陶瓷原料與堿性材料-粉末與顆粒狀非氧化性陶瓷原料與堿性材料硫含量的測定-第1部分 感應爐熔融后紅外測試法

73

ISO 14720-2:2013

Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials -Part 2:Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow

陶瓷原料與堿性材料-粉末與顆粒狀非氧化性陶瓷原料與堿性材料硫含量的測定-第2部分 氧氣中燃燒后，ICP OES或IC 測試法

74

ISO 16169-2018

Preparation of silicon carbide and similar materials for analysis by ISO 12677 X-ray fluorescence (XRF) - Fused cast-bead method 利用ISO 12677 X射線熒光化學分析（熔鑄玻璃片法）制備碳化硅及相似物質

75

ISO 20565-1:2008

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica

含鉻耐火制品和含鉻原料化學分析方法（可與X射線熒光法并行使用的另一種方法）-第一部分：儀器、試劑、溶樣及重量法測定二氧化硅

76

ISO 20565-2:2008

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis含鉻耐火制品和含鉻原料化學分析方法（可與X射線熒光法并行使用的另一種方法）-第二部分：濕法化學分析

77

ISO 20565-3:2008

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively

coupled plasma atomic emission spectrometry含鉻耐火制品和含鉻原料化學分析方法（可與X射線熒光法并行使用的另一種方法）-第三部分：火焰原子吸收分光光度法（FAAS）和感應耦合等離子原子發射光譜法(ICP-AES)

78

ISO 21068-1:2008

Chemical analysis of silicon-carbide -containing raw materials and refractory products-Part 1: General information  and sample preparation

含碳化硅原料及耐火制品的化學分析方法-第一部分：總則及制樣

79

ISO 21068-2:2008

Chemical analysis of silicon-carbide -containing raw materials and refractory products-Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide ,total and free silica and total and free silicon 含碳化硅原料及耐火制品的化學分析方法-第二部分：酌減、總碳、游離碳和碳化硅、總游離二氧化硅及游離二氧化硅、總游離硅及游離硅的測定

80

ISO 21068-3:2008

Chemical analysis of silicon-carbide -containing raw materials and refractory products-Part 3: Determination of nitrogen, oxygen, metallic and oxidic  constituents 含碳化硅原料及耐火制品的化學分析方法-第三部分：氮、氧、金屬成分及氧化物的測定

81

ISO 21078-1:2008

Determination of boron oxide in refractory products-Part 1: Determination of total boron oxide in oxidic  materials for ceramics, glass and glazes耐火制品中B₂O₃的測定-第一部分：陶瓷、玻璃和釉料用氧化物材料中B₂O₃總量的測定

82

ISO 21078-2:2006

Determination of boron oxide in refractory products-Part 2: Acid extraction method of determination of boron oxide in binder

耐火制品中B₂O₃的測定-第二部分：酸萃取法測定結合劑中的B₂O₃

83

ISO 21079-1:2008

Chemical analysis of refractories containing alumina, zirconia and silica-Refractories containing from 5% to 45% of ZrO₂ (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution含氧化鋁、氧化鋯、氧化硅耐火材料化學分析方法-含氧化鋯5%-45%的耐火材料（可與X射線熒光法并行使用的另一種方法）-第一部分：儀器、試劑、溶樣

84

ISO 21079-2:2008

Chemical analysis of refractories containing alumina, zirconia and silica-Refractories containing from 5% to 45% of ZrO₂ (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis含氧化鋁、氧化鋯、氧化硅耐火材料化學分析方法-含氧化鋯5%-45%的耐火材料-第二部分：濕法化學分析

85

ISO 21079-3:2008

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively

coupled plasma atomic emission spectrometry含氧化鋁、氧化鋯、氧化硅耐火材料化學分析方法-含氧化鋯5%-45%的耐火材料-第三部分：火焰原子吸收分光光度法（FAAS）和感應耦合等離子原子發射光譜法(ICP-AES)

86

ISO 21587-1:2007

Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica

鋁硅酸鹽耐火制品化學分析方法（可與X射線熒光法并行使用的另一種方法）-第一部分：儀器、試劑、溶樣及重量法測定二氧化硅

87

ISO 21587-2:2007

Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis鋁硅酸鹽耐火制品化學分析方法（可與X射線熒光法并行使用的另一種方法）-第二部分：濕法化學分析

88

ISO 21587-3:2007

Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively

coupled plasma atomic emission spectrometry鋁硅酸鹽耐火制品化學分析方法（可與X射線熒光法并行使用的另一種方法）-第三部分：火焰原子吸收分光光度法（FAAS）和感應耦合等離子原子發射光譜法(ICP-AES)

89

ISO 22016-2015

Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods 耐火原料和制品-重量滴定法測硫含量

90

ISO 26845:2008

Chemical analysis of refractories-General requirement for wet chemical analysis, atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrophotometry methods耐火材料化學分析方法-濕法化學分析、原子吸收光譜及感應耦合等離子原子發射光譜法的一般技術條件

91

ISO 23071:2021

Refractory products - Determination of reduced species in carbon containing refractories by XRD XRD測定含碳耐火材料化學分析方法

其他（技術指南和技術勘誤表）

92

ISO 10081-2:2003/Cor 1:2008

Classification of dense ,shaped refractory products-Part 2: Basic products containing less than 7% residual carbon-Technical Corrigendum致密定形耐火制品的分類 第二部分：殘?zhí)苛啃∮?%的堿性耐火制品 技術勘誤表

93

ISO/TR 21828:2010

Guidance on standards available for preparation and testing of monolithic, unshaped refractory products 不定形耐火材料制備與試驗技術指南